Iron Corps EXTREME A123Racing™ 2300mAh W/On Board
Balancer
Use the Drop Down menu at the top of the page
to select the proper blanacing connector. A123's must be
balanced. *** This page
contains only Iron Corps Extreme WITH onboard
balancers. Connector configurations a the top of the page allow for
assembly of packs without balancer lead.
The Iron Corps Extreme A123Racing™ is assembled by Fromeco using
the Legendary A123Racing™ M1 high out put 26650 cell. Capable if
ridiculous amounts of current from one single pack, the Iron Corps Extreme is an
excellent choice for 40% and above size Aircraft. Iron Corps extreme
packs are also a great choice 35% aircraft as well.
Fromeco uses 1/2" .5 solid Nickel weld tabs that are welded by
Fromeco, to ensure maximum current flow and balance in a 2S pack.
Iron Corps Extreme can not be load checked
using traditional methods.
On the Fromeco site we have 4 types of balancer connections availible.
Pictured above is the JST PA 5S Balancing connector. We also
carry a 6S as well however you will not find that on the menu tree this must be
special ordered. The JST connector is used primarily on the
FMA line of charger such as the 10S and 4S.
Pictured above is the JR Crossover. This plug is a standard JR
that is modified by us so that the Red or Positive wire is rerouted to the
outside of the plug and the signal wire is routed to the middle of the
plug. This will work with any JST XH, blinky and most other balancer
ports. This fits Hyperion
chargers.
Pictured above is the Single JR this plug has a single wire that lands to the
Center Position (picture is incorrect) this is only used by the A123 brand
charger called the Hypercharger.
The IDC plug looks just like a JR connector but has 4 postions instead of
3. This plug will fit JST XH, Blinky and most other balancing
ports. This is our default plug if we don't know which plug to put
on or the customer has not specified. This plug can be used on a 2S
and 3S configuration. This fits Hyperion
chargers.
