Iron Corps EXTREME A123Racing™ 4600mAh w/Deans
**All Iron Corps Extreme 4600mAh packs are
sold with onboard balancing, (NOT Optional). Connector configuration at
top will also allow for balancer plug of your choice. Using onboard
balancers in conjunction with a balancing charger will NOT cause issue, and will
infact make it easier for a balancing charger to balance a pack.
**Iron Corps Extreme 4600mAh packs are not
sold with JR only taps. If you are looking for that configuration
please call us 503.715.0020 so we can enquire as to why.
The Iron Corps Extreme A123Racing™ is assembled by Fromeco using
the Legendary A123Racing™ M1 high out put 26650 cell. Capable if
ridiculous amounts of current from one single pack, the Iron Corps Extreme is an
excellent choice for 40% and above size Aircraft. Iron Corps extreme
packs are also a great choice 35% aircraft as well.
Fromeco uses 1/2" .5 solid Nickel weld tabs that are welded by
Fromeco, to ensure maximum current flow and balance in a 2S pack.
Iron Corps Extreme can not be load checked
using traditional methods.
On the Fromeco site we have 4 types of balancer connections availible.
Pictured above is the JST PA 5S Balancing connector. We also
carry a 6S as well however you will not find that on the menu tree this must be
special ordered. The JST connector is used primarily on the
FMA line of charger such as the 10S and 4S.
Pictured above is the JR Crossover. This plug is a standard JR
that is modified by us so that the Red or Positive wire is rerouted to the
outside of the plug and the signal wire is routed to the middle of the
plug. This will work with any JST XH, blinky and most other balancer
ports. This fits Hyperion
chargers.
Pictured above is the Single JR this plug has a single wire that lands to the
Center Position (picture is incorrect) this is only used by the A123 brand
charger called the Hypercharger.
The IDC plug looks just like a JR connector but has 4 postions instead of
3. This plug will fit JST XH, Blinky and most other balancing
ports. This is our default plug if we don't know which plug to put
on or the customer has not specified. This plug can be used on a 2S
and 3S configuration. This fits Hyperion
chargers.
