Ion Cube Red A123 3Chan. w/GUI

• Overview
• Specifications
• Accessories
• Image Gallery
• Documents

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:   All Ion Cubes shown on this page would be considered Advanced
due to the fact they all have the Programming and Display Card installed.
Also, all chargers have all 5 charger channels installed.

The Ion Cube is a 2S Lithium Phosphate (LiFePO4) capable charger. Sold in a Basic version with 3 charge outputs. All Ion Cubes can be upgraded to 5 channels, and a ‡‡Graphic User Interface "Brain"» (Programming and Display Card) can be installed to increase functionality.  Ion Cube is the perfect tool for Pilots with the a mix of Giant Scale Aircraft, Foamies, Smaller Electric Aircraft, and Micro Helicopters.

Ion Cube Basic
»3 Channels upgradable to 5.   
»All channels auto detect pack configuration (2S).
»All channels charge at 1.5amp rate.
»Charger can be upgraded with Programming Display Card at anytime by the end user.
»All channels indicate end of charge.

Ion Cube Deluxe‡‡
»3 Channels upgradable to 5.
»All channels auto detect pack configuration (2S)
»All channels can charge from a .1amp to 2.5amp rate, programmable.
»All channels display batteries voltage during charge.
»All channels display in put amperage during charge.
»All channels display mA-h's put into packs during charge.
»All channels indicate end of charge

 

 

 

The Ion Cube uses Banana Plug jacks for its power input. 

 

 

 

 

 

To the left is a picture of the Ion Cube displaying a Charge Amperage of 1.5amps and a battery voltage of 8.34 Volts.

 

 

 

 

 

 

 

Pictured above is an Ion Cube showing the mA-h counter screen on channel 3.  So far the Ion Cube has counted 32mA-h's.

 

 

 

 

 

 

 

Power Supplies Considerations
Ion Cubes can be hungry little Critters, special considerations should taken for powering them. An Ion Cube Deluxe with a all 5 channels charging at 2.99 amps will need at least a 15 to 18 amp power supply for power, or a fully charged car battery/gel cel.
Calculating a Power Supply for your Cube.
Basic Version~1.5amps X # of channels | 3 channel = 4.5 amps needed.
Deluxe Version~2.99amps X # of channels | 3 channel = 9.97 amps needed.

Power supplies we recommend.
They are inexpensive and effective, "Google" them for best pricing.
Pyramid PS21KX
Pyle PSL212X