Iron Corps EXTREME A123™ 2300mAh W/O On Board
Balancer
**All Iron Corps Extreme Seiko packs will be
manufactured with a balance tap. Use the drop down menu above to
choose the proper tap.
The Iron Corps Extreme A123™ is assembled by Fromeco using the
Legendary A123™ M1 high out put 26650 cell. Capable if ridiculous amounts
of current from one single pack, the Iron Corps Extreme is an excellent choice
for 40% and above size Aircraft. Iron Corps extreme packs are also a
great choice 35% aircraft as well.
Fromeco uses 1/2" .5 solid Nickel weld tabs that are welded by
Fromeco, to ensure maximum current flow and balance in a 3S pack.
Iron Corps Extreme can not be load checked using traditional
methods.
On the Fromeco site we have 4 types of balancer connections availible.
Pictured above is the JST PA 5S Balancing connector. We also
carry a 6S as well however you will not find that on the menu tree this must be
special ordered. The JST connector is used primarily on the FMA
line of charger such as the 10S and 4S.
Pictured above is the JR Crossover. This plug is a standard JR
that is modified by us so that the Red or Positive wire is rerouted to the
outside of the plug and the signal wire is routed to the middle of the
plug. This will work with any JST XH, blinky and most other balancer
ports.
Pictured above is the Single JR this plug has a single wire that lands to the
Center Position (picture is incorrect) this is only used by the A123 brand
charger called the Hypercharger.
The Last balancer plug which is not pictured is a IDC plug that looks
just like a JR connector but has 4 postions instead of 3. This plug
will fit JST XH, Blinky and most other balancing ports. This is our
default plug if we don't know which plug to put on or the customer has not
specified. This plug can be used on a 2S and 3S configuration.