Sahara's in photos are all the Deans in and Deans out puts, Super Sahara can be sold with standard Futaba in and JR output.  However it is recommended that if you buy this regulator you use Deans input and at least 2 JR out put.  If you need a regulator for light duty such as IGN. we recommend the standard Sahara. 

About the Super Sahara Regulator

The all new Super Sahara Regulator by Fromeco is one of the highest rated Linear regulators in the RC market. Specifically designed to operate at High Delta V, pass high currents, and dissipate more heat than any of our competitors. The Super Sahara is capable of 25amps of continuous current. The Super Sahara is a perfect match for a fully 8711, or 5955 outfitted 35% to 40%.   Weighing in at 2.2oz's with 9"Deans and 2 JR out puts. 

Fromeco Regulators are FULLY ADJUSTABLE, voltage is adjustable from 5.4VDC to 6.4VDC voltages may vary -+ .05 volts on upper and lower end.  Custom voltages available upon request (please call).

Building off one of Fromeco's best, and most used Regulators in the market, the "Arizona" regulator line for helicopters.   The Super Sahara is a vetted design, utilizing traces that are 3/32" wide. Combine those details with 16awg wire, Deans Connectors or Anderson Power Poles, 3 out put leads, and a massive heat sink and fan, as standard equipment and you have a regulator like few others in the market.

The Sahara Heat Sink

As always Fromeco's heat sinks are custom designs of our own that are custom CNC milled out of billet Aluminum.  The new Sahara heat sink is terribly efficient, allowing for maximum cooling in all weather conditions world wide, and excels in places like Tucson!  Coupled with the Fan pictured above the Heat Sink is capable of shedding large amounts of heat.

Pictured below, the Sahara heat sink is both mechanically fastened down, and also has 2 "landing gear" that come down to support one end of the heat sink and protect against vibration. 

The "Inside" on Fromeco's Current Ratings

Fromeco believes very strongly that our Equipment be
rated no higher than it's weakest component. In the case
of The Regulator this would be the "Hobby Type"
connectors we all have to use to interface with our RX's.
These connectors are only Rated @3amps per connector.
Because of this Fromeco offers options on the input
and out put of our Regulators.

Regulator with standard connectors     3amps

Regulator with Deans or PowerPoles and
2 JR out puts.                  6amps

Regulator with Deans or PowerPoles and
3 JR out puts.                  9amps

Deans in and Deans out would be
considered and unlimited rating for
RC RX uses.